Phone: 0 (552) 380 25 25  |  Weekdays 10:00–18:00 · Technical support 24/7

🇹🇷 TR

Industrial Products and Field Systems

  • Home
  • Industrial Products
Design · Build · Install

Industrial Products: One Team for Device and Software

Digital Bridge industrial products cover card access control, fingerprint access, licence plate recognition, barrier and parking systems, automatic meter reading, kiosks and digital signage displays. The circuit board, enclosure, firmware and management dashboard are designed by one team, and we also handle installation and 24/7 technical support.

When a field system fails, the fault usually sits between the hardware and the software — and so does the blame, if two suppliers delivered them. We design the circuit board, enclosure, firmware and management dashboard in-house and install them ourselves, so there is one party accountable from specification to support. We work across Turkey, including for international companies running sites here.

01

OSOS — Automatic Meter Reading

Read water, electricity and gas meters without sending anyone out. GPRS, LoRa or NB-IoT connectivity, with every reading collected in one reporting system.

Water Utilities Municipalities Energy Companies
View the System
02

Kiosks and Self-Service Terminals

Touch-screen terminals that take routine transactions — bill payment, appointments, tickets, enquiries — away from the counter. Enclosure, software and remote management included.

Public Sector Shopping Centres Hospitals Transport
View the System
03

Card Access Control

Decide who can use which door, and when, from one dashboard. A single card read opens the door and records attendance; turnstiles and visitor management included.

Factories Office Buildings Campuses Residential Sites
View the System
04

Fingerprint Access Control

Stops people passing their cards to colleagues or clocking in for each other. Fingerprint readers, access software and shift tracking installed as one system.

Production Plants Secure Areas R&D Centres
View the System
05

Licence Plate Recognition

AI reads the plate from the camera image, lifts the barrier for registered vehicles and flags the rest. Every movement is logged with plate and photo.

Car Parks Factory Gates Residential Sites Shopping Centres
View the System
06

Custom Device Design

If the device you need doesn't exist, or the ones on the market don't suit your site, we design the electronics, enclosure and software from your specification or idea.

Industrial IoT Prototyping Series Production Embedded Firmware
See the Process

Tell Us About Your Site

How many doors, meters or lanes, and in what conditions? We assess technical feasibility free of charge and send a written proposal with scope and cost.

+90 552 380 25 25 Request a Quote
No Off-the-Shelf Packages

Custom Device Design, Built Around Your Site

Off-the-shelf hardware often struggles in the field: the enclosure can't cope with dust, the network signal is weak where the device sits, or the software won't talk to the systems you already run. So every product we offer — meter reading, kiosks, access control, plate recognition — is adapted to its installation environment and to the software it has to work with.

If you need something that isn't in our range (see custom device manufacturing and IoT), we start from your specification or a rough description. Circuit and PCB design, enclosure, firmware, web and mobile dashboards and on-site installation all stay with one team, and nothing goes into series production until you have signed off the prototype.

Idea or Specification

A rough idea or a full technical specification — either is enough to start. The technical feasibility review is free.

Electronics Design

Schematic, PCB layout and component selection are done in-house. A prototype is built and tested on site.

Enclosure

Materials and IP rating are chosen for the conditions the device will face — dust, humidity, impact.

Firmware and Dashboard

Device firmware, web dashboard and mobile app come from the same team, so there is no gap in responsibility between them.

Series Production

Production starts once you approve the prototype. Units are quality-checked and packed before delivery.

Support After Handover

Technical support is available 24/7, with on-site service when needed. The people who designed the device handle its faults.

Process

From Idea to Installation in Three Steps

01

We Define the Need

What must the device do, where will it run, how many are needed and which software must it talk to? From those answers we write a proposal: scope, phases and cost.

02

Design and Prototype

Electronics, enclosure and software are designed together. The prototype is trialled on site, and series production waits for your approval.

03

Production and Installation

Quality-checked units are installed, connected to the software and handed over with training for the people who will use them — working, not just delivered.

Why One Team

One Point of Contact When Something Breaks

Electronics Design

Schematics, PCBs and prototypes are ours, so when a component changes we can update the design without waiting on a third party.

Enclosure Design

IP rating and materials chosen for the installation environment, built for long service in the field.

Firmware and Web Software

Device firmware, central dashboard and mobile app from one team — including the link to your existing ERP or HR system.

Installation and Commissioning

Our own technicians install the system, bring it live and train the staff who will run it.

Remote Monitoring

Device status is visible on a central dashboard with fault alerts, so problems that can be fixed remotely are fixed without a site visit.

24/7 Technical Support

After handover you keep working with the same team: a 24/7 support line and on-site service when needed.

Questions we hear most often

Frequently Asked Questions

What industrial products does Digital Bridge offer?

Card access control, fingerprint access, licence plate recognition, barrier and parking systems, automatic meter reading, kiosks and self-service terminals, digital signage displays and industrial data terminals. If the device you need is not in the range, we design the electronics, enclosure and software from your specification or a rough description of the idea.

Are your industrial products off the shelf or adapted per project?

We do not sell off the shelf. Every product is adapted to its site: the enclosure is chosen for dust, moisture and impact, connectivity uses a technology that works in that location, and the software connects to the systems you already run. Series production never starts before you have approved the prototype.

Do hardware and software come from the same company?

Yes. Circuit and PCB design, enclosure, firmware, web dashboard and mobile app are developed by one team, and our own technicians install on site. When something fails, there are no two suppliers blaming each other: you have one point of contact. We also build the connection to your existing ERP or HR system.

Do you provide support after installation?

Yes. Devices are installed, connected to the software and handed over with training for the people who will use them. After delivery our technical support line is open 24/7 and we provide on-site service when needed. Device status is monitored centrally, so issues that can be fixed remotely are handled without a site visit.

How does the feasibility review and quote work, and is it charged?

The technical feasibility review is free. We ask what the device must do, where it will run, how many are needed and which software it must talk to. From those answers we send a written proposal covering scope, phases and cost. A rough idea is enough to start, and so is a full specification.

Have a different question? Ask Us

Talk to an Engineer

Tell us what you need to solve. We'll come back with a written proposal.